Segitiga exposure

CAMERA EXPOSURE

A photograph's exposure determines how light or dark an image will appear when it's been captured by your camera. Believe it or not, this is determined by just three camera settings: aperture, ISO and shutter speed (the "exposure triangle"). Mastering their use is an essential part of developing an intuition for photography.

UNDERSTANDING EXPOSURE

Achieving the correct exposure is a lot like collecting rain in a bucket. While the rate of rainfall is uncontrollable, three factors remain under your control: the bucket's width, the duration you leave it in the rain, and the quantity of rain you want to collect. You just need to ensure you don't collect too little ("underexposed"), but that you also don't collect too much ("overexposed"). The key is that there are many different combinations of width, time and quantity that will achieve this. For example, for the same quantity of water, you can get away with less time in the rain if you pick a bucket that's really wide. Alternatively, for the same duration left in the rain, a really narrow bucket can be used as long as you plan on getting by with less water.
In photography, the exposure settings of aperture, shutter speed and ISO speed are analogous to the width, time and quantity discussed above. Furthermore, just as the rate of rainfall was beyond your control above, so too is natural light for a photographer.

EXPOSURE TRIANGLE: APERTURE, ISO & SHUTTER SPEED

Each setting controls exposure differently:
Aperture: controls the area over which light can enter your camera
Shutter speed: controls the duration of the exposure
ISO speed: controls the sensitivity of your camera's sensor to a given amount of light
One can therefore use many combinations of the above three settings to achieve the same exposure. The key, however, is knowing which trade-offs to make, since each setting also influences other image properties. For example, aperture affects depth of field, shutter speed affects motion blur and ISO speed affects image noise.
The next few sections will describe how each setting is specified, what it looks like, and how a given camera exposure mode affects their combination.

SHUTTER SPEED

A camera's shutter determines when the camera sensor will be open or closed to incoming light from the camera lens. The shutter speed specifically refers to how long this light is permitted to enter the camera. "Shutter speed" and "exposure time" refer to the same concept, where a faster shutter speed means a shorter exposure time.
By the Numbers. Shutter speed's influence on exposure is perhaps the simplest of the three camera settings: it correlates exactly 1:1 with the amount of light entering the camera. For example, when the exposure time doubles the amount of light entering the camera doubles. It's also the setting that has the widest range of possibilities:

Shutter Speed	Typical Examples
1 - 30+ seconds	Specialty night and low-light photos on a tripod
2 - 1/2 second	To add a silky look to flowing water Landscape photos on a tripod for enhanced depth of field
1/2 to 1/30 second	To add motion blur to the background of a moving subject Carefully taken hand-held photos with stabilization
1/50 - 1/100 second	Typical hand-held photos without substantial zoom
1/250 - 1/500 second	To freeze everyday sports/action subject movement Hand-held photos with substantial zoom (telephoto lens)
1/1000 - 1/4000 second	To freeze extremely fast, up-close subject motion

How it Appears. Shutter speed is a powerful tool for freezing or exaggerating the appearance of motion:

Slow Shutter Speed

Fast Shutter Speed

With waterfalls and other creative shots, motion blur is sometimes desirable, but for most other shots this is avoided. Therefore all one usually cares about with shutter speed is whether it results in a sharp photo — either by freezing movement or because the shot can be taken hand-held without camera shake.
How do you know which shutter speed will provide a sharp hand-held shot? With digital cameras, the best way to find out is to just experiment and look at the results on your camera's rear LCD screen (at full zoom). If a properly focused photo comes out blurred, then you'll usually need to either increase the shutter speed, keep your hands steadier or use a camera tripod.
For more on this topic, see the tutorial on Using Camera Shutter Speed Creatively.

APERTURE SETTING

A camera's aperture setting controls the area over which light can pass through your camera lens. It is specified in terms an f-stop value, which can at times be counterintuitive, because the area of the opening increases as the f-stop decreases. In photographer slang, when someone says they are "stopping down" or "opening up" their lens, they are referring to increasing and decreasing the f-stop value, respectively.

By the Numbers. Every time the f-stop value halves, the light-collecting area quadruples. There's a formula for this, but most photographers just memorize the f-stop numbers that correspond to each doubling/halving of light:

Aperture Setting	Relative Light	Example Shutter Speed
f/22	1X	16 seconds
f/16	2X	8 seconds
f/11	4X	4 seconds
f/8.0	8X	2 seconds
f/5.6	16X	1 second
f/4.0	32X	1/2 second
f/2.8	64X	1/4 second
f/2.0	128X	1/8 second
f/1.4	256X	1/15 second

The above aperture and shutter speed combinations all result in the same exposure.

Note: Shutter speed values are not always possible in increments of exactly double or half another shutter speed, but they're always close enough that the difference is negligible.

The above f-stop numbers are all standard options in any camera, although most also allow finer adjustments, such as f/3.2 and f/6.3. The range of values may also vary from camera to camera (or lens to lens). For example, a compact camera might have an available range of f/2.8 to f/8.0, whereas a digital SLR camera might have a range of f/1.4 to f/32 with a portrait lens. A narrow aperture range usually isn't a big problem, but a greater range does provide for more creative flexibility.